Copper Foil Electrolyte Concentration Measurement
Track copper and sulphuric-acid concentrations in a supported electrolyte loop before copper-foil electro-deposition.
Two concentrations, one defined process stream
Copper-foil production requires the prepared electrolyte to meet the process specification before it is sent to the electro-deposition equipment. Rhosonics describes monitoring Cu++ and H2SO4 in a recirculation bypass at the storage tank using ultrasonic, conductivity and temperature inputs. Its case study used a CCM 9580 and a polypropylene measuring cell. That documented arrangement is a starting point for review, not a universal specification for every electrolyte.
Representative genuine Rhosonics 9500-family analyser image; installation hardware is selected for the actual electrolyte.
Define the copper-foil concentration basis
Dual-component measurement needs a chemistry-specific model and reference method.
Copper ion range
Record the expected Cu++ concentration, makeup, dissolution and plating-related variation.
Acid range
Document free sulphuric-acid concentration and any other dissolved components that could affect the calibration.
Bypass conditions
Review flow, temperature, solids or gas, cell material and access to the storage-tank recirculation loop.
Reference analysis
Agree laboratory methods and paired samples for both concentrations over the intended operating range.
A practical measurement review pathway
Move from a broad process idea to a defined, testable duty before using the signal for decisions.
Map the electrolyte loop
Locate the storage, recirculation and electro-deposition boundaries.
Define both outputs
Specify the Cu++ and H2SO4 values and the process action attached to each.
Review materials
Check wetted components against the actual solution and conditions.
Validate the model
Compare both outputs with representative laboratory results before process use.
Where the measurement adds value
Set out both the useful signal and its limitations before specifying the instrument.
Operational value
A validated two-component online trend can help operators identify drift before the electrolyte reaches the electro-deposition stage and provide more context than conductivity alone.
Important boundary
The CCM 9500/9580 configuration is application-specific. Other dissolved substances, temperature range, contamination and required accuracy must be reviewed; a single-component CCM 8500 should not be assumed equivalent for this dual-component duty.
Sources and application boundary
The sources below establish the measurement context; they are not evidence of a PMA installation at your site. Final suitability depends on the actual material, operating range, installation and representative validation.
Search every application
Use the Application Finder to search process measurement guidance by material, duty or analyser. Compare duties in the chemical concentration library and review the 9500 Series analyser.
To contact us, or to request a callback, simply use the form below and we will promptly get back to you.
We greatly value all of the inquiries which our products and services generate and we are very confident that we will have the right solution available for you at the first point of contact when you reach our experienced team of engineers.
Estamos aquí para ayudar.
Tanto si necesita que le devolvamos la llamada como si tiene alguna pregunta técnica compleja, nuestro equipo de expertos está siempre a su disposición. Nuestro objetivo siempre ha sido ofrecer un servicio al cliente de primera clase.