Grinding Circuit Slurry Density Monitoring
Use continuous non-nuclear density data to understand mill feed, cyclone classification and grinding-circuit balance.
Define the grinding stream and the decision it supports
Grinding circuits can contain several candidate points with different solids ranges and operating value. Select one fully flooded stream, document its ore and hydraulic range, and align the SDM ECO trend with samples and flow before using it for control or mass balance.
Representative mineral-processing application image; final sensor position depends on the process survey.
Build the grinding-circuit measurement basis
The installation should be designed around the actual circuit, not a generic mill label.
Candidate point
Review mill feed, discharge, regrind feed or cyclone feed and state why that point represents the decision.
Ore and solids range
Document mineralogy, particle size, solids concentration, density range and credible process transitions.
Hydraulic conditions
Confirm full pipe, velocity, pressure, liner, pump and bend proximity, abrasion and entrained air.
Validation evidence
Use time-aligned density, flow, representative samples and operating events across the intended range.
A practical measurement review pathway
Move from a broad application to a defined, testable duty before the signal is used for process decisions.
Name the stream
Map the selected line and its upstream and downstream equipment.
Define normal states
Record stable, start-up, shutdown and upset conditions.
Survey the installation
Confirm fitting, access, pipe fill and maintenance requirements.
Validate before control
Compare the trend with representative evidence before closing a control loop.
Where the measurement can add value
Continuous measurement is useful only when the process boundary, validation method and operating response are explicit.
Operational value
A validated density trend can help operators see loading changes between samples and interpret grinding or classification performance.
Important limits
Density alone does not identify mineral grade, particle-size distribution or recovery. Those variables remain separate measurements.
Sources and application boundary
These sources define the general measurement context. Final suitability depends on the actual composition, operating range, pipe or vessel conditions, materials, installation point and validation evidence.
Search every application
Use the Application Finder to compare this duty with mining, cement, water, chemical, quarry, dredging and food or beverage guidance.
To contact us, or to request a callback, simply use the form below and we will promptly get back to you.
We greatly value all of the inquiries which our products and services generate and we are very confident that we will have the right solution available for you at the first point of contact when you reach our experienced team of engineers.
Estamos aqui para ajudar.
Seja para solicitar um retorno de chamada ou para esclarecer uma dúvida altamente técnica, nossa equipe de especialistas está sempre à disposição. Nosso foco sempre foi oferecer um atendimento ao cliente de excelência.